All you're going to need to do is take note of the shape, the amount of jacks you have and measure the size of your jack feet.
For instance, if you had 4 6" square feet then you could use the SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR you were looking at. view full answer...
There's unfortunately not a guide to tell us the sizing of your trailer's jack pads so you'll want to measure and note the shape of each pad. I've run into numerous situations where the front and rear pads were either different sizes or shapes to work with the space available.
The SnapPad # SN88FR you were looking at are designed to fit four 9" round pads and two 12" round pads. If you can let me know what your shape and dimensions are I'd be happy to pick out the correct package. view full answer...
Hello Linda,
The Replacement Touch Pad Control Panel for Lippert Power Gear Hydraulic RV Leveling System # LC58CJ measures 5-1/8" long x 3-5/8" wide. view full answer...
There can be weight applied to the tow vehicle, so to measure tongue weight for weight distribution at a commercial scale, what you want to do is, with your vehicle and trailer fully loaded like you're headed on a trip, drive on to the scale with all 4 wheels of the truck and record the weight of the truck with the trailer attached.
Then unhook the trailer and jack up the trailer tongue so there is no weight on the hitch ball (make sure that the trailer jack is not on the scale). Record... view full answer...
We only have one entry door lock that can be controlled through Bluetooth and keyed alike. I do not have any way of knowing what size cut-out that your 2022 Mini Lite 2516 travel trailer has, so you will want to verify the dimensions you need. It is the Global Link RV Entry Door Locking Latch Kit # GL55VR and it fits a cut-out size of 3-3/4" tall x 2-3/4" wide. view full answer...
Hey Neil, so the dimension you are looking for is 3/4 inches. This is the distance from the top of the bracket down to the inside portion of the curved part of the bracket. view full answer...
For a 26" long replacement spring, I recommend the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles item # e94SR. This spring works with 6,000 lbs axles and each spring has a 3,000 lbs capacity.
To confirm this is the correct spring you will want to measure your current springs with the weight off of them. They'll stretch out over time so the best way to get an accurate measurement is to jack up one side of your trailer and measure the springs from eye bolt to eye bolt. If you've already... view full answer...
Go To Results